> Source: https://kwestra.com/distributors
> Order entry automation for distributors: POs from email and PDF matched to your SKUs and contract prices, then entered in your ERP. Mismatches go to a CSR.

Order entry · for distributors

# Order entry automation for distributors: stop retyping customer orders into your ERP.

The system reads each PO, matches lines to your SKUs and contract prices, and creates the sales order in your ERP. Anything it is not sure about stops for your CSR.

 Send 20 sample orders  Watch the gate

You see the automation rate on your real orders before you spend anything. The audit starts at $2,500 for one process and is priced to your branches and systems. It is credited against the build.

\*Typical for one well-scoped order stream. Multiple ERPs or heavy EDI work take longer.

Fig. 1 Order sorting desk Drum · balance · lever held for a person · line 4 price

1. 01 Inbox Chute and paper-knife
2. 02 Read the PO Lineator and pin comb
3. 03 Match SKU and price Parts drum and balance
4. 04 Human gate Stop bar and lever
5. 05 Sales order in the ERP Ticket printer and tray

Example run on synthetic documents. Nothing is uploaded or stored.

* 01 20 orders All we need to quote your automation rate
* 02 Every Order matches your rules or passes a person
* 03 60 days\* First order stream in production
* 04 Yours Code, runbook and data

The day

## Same inbox. Same cutoff. Different afternoon.

An example day of 20 orders, assumed for the drawing. Yours is measured on your real orders.

8 am10noon2 pm Cutoff 4 pm

 Before

**3** still open at cutoff

 After

**17** posted · **3** held for a person

* Being retyped
* Waiting
* Posted
* Held for a person

End of daySame 20 orders

Before **3** open at cutoff

* Every order retyped by hand
* Part numbers guessed or phoned
* Orders still open at cutoff

After **17** posted by 4 pm

* Each order a draft sales order in minutes
* Off-price and unknown lines stop
* CSRs work a short exception queue

Where order entry really goes wrong

## The edge cases are the job.

A clean PDF is the easy part. One example PO, every line that would stop at the gate.

05 Also received via portal

PO 48112 07Received by fax

06Ship to: new address Need by Fri · freight collect

| Cust. part     | Description            | Qty | UoM  | Unit price |
| -------------- | ---------------------- | --- | ---- | ---------- |
| ACM-7781-B     | Hex bolt 1/2 x 2 zinc  | 500 | EA   | $0.42      |
| 01 VLV-2 BRZ   | Gate valve 2 in bronze | 12  | EA   | $61.00     |
| 02 00-55019    | Nitrile gloves L       | 40  | CS   | $38.90     |
| 03 PVC-SCH40-3 | PVC pipe 3 in x 10 ft  | 220 | EA   | $14.15     |
| 04 FLT-HV-20   | HVAC filter 20x25x1    | 7   | PK12 | $4.80      |
| 07 TAPE-2-BLK  | Electrical tape 3/4 in | 45  | EA   | $1.10      |

1. 01 Customer part numbers The system proposes your SKU with a confidence. Confirm once and the map sticks.
2. 02 Off-contract price Contract and tier prices come from your ERP. A different price is a hard stop.
3. 03 Partials and backorders Checked against stock. Your rule per customer: ship, hold or ask.
4. 04 Units of measure Case, each, pack of 12\. A quantity that does not fit the pack size stops.
5. 05 Duplicate PO The same PO by email and by portal. The second one is flagged.
6. 06 Ship-to and terms New addresses, freight terms, dates that cannot be met.
7. 07 Handwritten or faxed Low-confidence reads stop every time. A person confirms the quantity.

What the CSR sees

* The original PO beside the proposed lines
* Match confidence and price source
* Stock position and the reason it stopped
* Approve
* Amend
* Reject

Every decision logged with a name and a time.

Illustrative examples

## Three kinds of distributor.

Illustrative examples, not client case studies. Every rate below is an assumption; the sample analysis measures yours.

* Example Industrial MRO distributor
70 to 80% of lines post without a touch **(assumed)**
Given
Assume 300 orders a day, 40% as PDFs from 20 large accounts, each with its own part numbering.
Then
Part maps learned once per customer. CSRs spend the morning on exceptions.
Assumed rate, not a client result.
* Example Food service distributor
60 to 75% of lines post without a touch **(assumed)**
Given
Assume orders as email text with abbreviations, catch-weight items, a 4 pm cutoff.
Then
Catch-weight flag kept. Late orders roll to next day. A person approves substitutions.
Assumed rate, not a client result.
* Example Electrical wholesaler
45 to 60% of lines post without a touch **(assumed)**
Given
Assume contractor POs by photo and fax, handwritten quantities.
Then
Low-confidence reads stop every time. The exception rate shows where the real work is.
Assumed rate, not a client result.

Systems

## Sales orders land in the ERP you run.

Through the vendor API where there is one. Through the screen where there is not.

* NetSuite Item and customer lookup API
* Dynamics 365 Business Central Item cross references API
* SAP Business One Price lists API
* Acumatica Customer price classes API

Sales order Approved lines, your prices

* Epicor Prophet 21 Customer part numbers API
* Infor CloudSuite Distribution Contract pricing Screen
* QuickBooks Smaller operations API

* Vendor API
* Screen automation

EDI stays EDI. This handles the orders EDI never covered.

Free, before anything else

## Send us 20 sample orders and we'll tell you the automation rate.

Tell us how orders reach you. Tick the box if you have a sample pack ready and we'll send a secure way to share it after we reply.

1. **1**Tell us how orders reach you
2. **2**We send a secure way to share about 20 orders
3. **3**An engineer sends your rate and the stopped lines

Nothing is uploaded here. Redact customer names if you prefer; we only need the line structure.

###

We will write to  from [hello@kwestra.com](mailto:hello@kwestra.com).

The offer

## Then the audit, if the rate looks worth it.

Fixed fee, fixed length, a written answer at the end.

Work order · SA-01 Priced to your scope

Processes in scopeEach one is mapped on its own.

1

People who do the work Roughly. It moves the price a little.

5 people

1500+

Systems it touchesERP, inbox, portal, spreadsheet, bank site.

2

Sites that run it differentlyBranches, entities or teams with their own way.

1

Regulated dataPick any that apply.

Most distributors have 2 to 4 branches. Add yours as sites.

Book now

$2,500

 Regular price $3,125

Larger audits run from $25,000 and can include a working pilot, an operations architecture and a board-ready business case.

Launch offer: 20% off when you book by Dec 31, 2026\. Your quote is held for 48 hours.

Work order

SA-01 Starter

Duration

2 weeks

Credited in full

$2,500

For a build signed within 90 days of the readout. The first $5,000 is credited in full, then half of the rest.

1. SA-01 Starter $2,500
2. SA-02 Team $3,000 to $6,000
3. SA-03 Department $6,500 to $12,000
4. SA-04 Division $13,000 to $20,000

Day 1Readout · day 14

Week 1: mapWeek 2: quote

Credited in full

What you hold at the readout

* 01 Order flow map Every route from customer PO to shipped sales order, timed.
* 02 Exception register Each edge case named, with its rule.
* 03 Scoped build and quote Scope, timeline, price.
* 04 An honest verdict If order entry should stay manual for now, that goes in writing too.

[Talk to us](https://kwestra.com/book)

**Pay in two halves** Two halves open from $7,500.

Updated price. The figure above is the one we hold for you.

The work order lists what you entered. If the work turns out bigger, we tell you at kickoff and you choose: we stick to what you entered, or we quote the difference before doing it.

Skip the call

## Start the audit now.

Pay the audit price and we start. No discovery call, no proposal round.

1. 01 Pay your audit price By card or US bank account, through Stripe.
2. 02 An engineer reads your brief You hear from them within one business day.
3. 03 Kickoff within 2 business days Then the weeks on your work order to the process map and a written quote.

**Credited in full: $2,500**against a build signed within 90 days of the readout.

SA-01 2 weeks $2,500 Updated price

 Regular price $3,125. Launch offer: 20% off when you book by Dec 31, 2026\. Your quote is held for 48 hours.

Checkout cancelled. Nothing was charged.

Questions

## What owners and ops managers ask first.

Something missing? Write to hello@kwestra.com.

08 questions, short answers

01 How do you handle part numbers that do not match ours?

The system proposes a match from your item master and past orders, with a confidence. A CSR confirms it once and the mapping is stored per customer. Unknown items always stop.

02 What about pricing?

Contract and tier prices come from your ERP. A line that would post at a different price is a hard stop, every time.

03 What about partial shipments?

You set the rule per customer: ship what is available and backorder the rest, hold the whole order, or ask. A person decides the exceptions.

04 We already have EDI.

Keep it. This is for the orders EDI never covered: the email, the PDF, the portal, the fax.

05 What if it reads a line wrong?

Every line is matched to your item master and priced against your ERP. Low-confidence and off-contract lines stop at the gate, with the original PO beside the proposed line, so a bad read is caught before the sales order exists.

06 Where do our orders and customer data go?

Orders stay in your mailbox, your storage and your ERP. Processing runs in infrastructure you own or that is dedicated to you, under a written data agreement. Nothing is used to train anything.

07 How long until orders are entering on their own?

From two weeks for the audit (more scope takes longer), then one order stream in production in about sixty days for a well-scoped case. Multiple ERPs or heavy EDI work take longer, and the quote says so.

08 Who owns it?

You do: code, infrastructure, documentation and runbook. We will run it for you if you prefer.

Keep reading

## Related guides and services.

Or start with a conversation

## Tell us how orders reach your ERP today.

A sentence or two is enough. A senior engineer replies within one business day.

What happens next

Today

Your brief goes straight to a senior engineer, not a sales team.

Within 1 business day

That engineer replies to you personally.

Then

You get a written answer on fit, scope and price. No email sequence.

Brief Read by a person

#### Received.

 An engineer will reply within one business day from hello@kwestra.com. If it is urgent, reach us at [hello@kwestra.com](mailto:hello@kwestra.com).

Book now
